TO-251/252-4R/6R AUTO TRIM/FORM SYSTEM

Classification:

Auto Trim/Form System

Loading: Utilizes a twin carrier strip + vertical lift mechanism to ensure continuous operation during box replacements. Picking: Utilizing manipulators to retrieve products from the carrier strips and deposit them onto the conveyor. Feeding: A step motor drives the feeding mechanism, accurately positioning products at a specified location. The system is equipped with an alarm function to notify of blockages. Conveying and Guiding System: A toothed conveyor rod transports products from beneath the die into the mold for scribing, molding, and detachment. Subsequently, ejector teeth push the products from the right side to an inclined unit for tubbing operations. Drive System: Servo motors and gear reducers propel cam mechanisms for punching. Collection: There are two methods of collection: loose and tube. For tube loading, empty tubes are stacked from the back into the tube slot, after which a conveying mechanism moves the empty tubes to the designated position for tubbing. The filled tubes are then pushed forward into the tube box.

Technical Specifications

Item	Description
Feeding mechanism	Stainless steel carrier strip
Discharge method	Tube/loose loading
Punching Pressure	≥4 tons
Punching Speed	60 times per minute
Punching Accuracy	<0.05mm
Dimensions	2800mm (Length) x 1060mm (Width) x 1870mm (Height)
Weight	1800KG
Power Supply	Three-phase five-wire system, 380V 50Hz, total power 8KW
Compressed Air	0.4Mpa to 0.6Mpa
Control Method	PLC

AUTO HIGH SPEED TRIM/FORM SYSTEM

None

online message

Dear customers, if you have any comments and suggestions on our products or services, please let us know in time, we will satisfy you as soon as possible