DIP4-8R AUTO DEGATE/TRIM SYSTEM

Classification:

Auto Trim/Form System

Loading: Utilizes a twin carrier strip + vertical lift mechanism to ensure continuous operation during box replacements. Picking: Using manipulators, products are retrieved from the carrier strip, where a visual inspection system identifies the orientation accurately. Approved products are allocated to the conveyor, and defective ones are sent to a discard bin. Feeding: A step motor drives the feeding mechanism, accurately positioning products at a specified location. The system is equipped with an alarm function to notify of blockages. Conveying and Guiding System: This section uses ejector needles to guide products into the mold for adhesive removal and transverse rib cutting, then moves them onto the collection track via a conveyor belt. An alarm signals in case of obstruction. Drive Component: Consisting of a servo motor, a reduction gear, and a cam mechanism. Collection: Utilizes a vertical lift mechanism with dual carrier strips, where a mechanical arm retrieves and stacks the products from the track into the boxes.

Technical Specifications

Item	Description
Feeding mechanism	Stainless steel carrier strip
Discharge method	Stainless steel carrier strip
Punching Pressure	≥4 tons
Punching Speed	60 times per minute
Dimensions	1520mm (Length) x 1040mm (Width) x 1800mm (Height)
Weight	1200KG
Power Supply	Three-phase five-wire system, 380V 50Hz, total power 6KW
Compressed Air	0.4Mpa to 0.6Mpa
Control Method	PLC

SMA/B/C/D AUTO TRIM/FORM SYSTEM

AUTO HIGH SPEED TRIM/FORM SYSTEM

online message

Dear customers, if you have any comments and suggestions on our products or services, please let us know in time, we will satisfy you as soon as possible