DIP4-8R AUTO TRIM/FORM SYSTEM

Classification:

Auto Trim/Form System

Loading: Utilizes a twin carrier strip + vertical lift mechanism to ensure continuous operation during box replacements. Picking: Using manipulators, products are retrieved from the carrier strip, where a visual inspection system identifies the orientation accurately. Approved products are allocated to the conveyor, and defective ones are sent to a discard bin. Feeding: A step motor drives the feeding mechanism, accurately positioning products at a specified location. The system is equipped with an alarm function to notify of blockages. Conveying and Guiding System: Ejector pins facilitate the movement of products into the mold for the molding, cutting, and separation stages. Products are subsequently pushed forward out of the mold for tube loading, while waste frames are pushed out to the right by the ejector pins. An alarm alerts to any blockages. Drive Component: Consisting of a servo motor, a reduction gear, and a cam mechanism. Tubbing: The tubing process is designed to handle two product lines concurrently, optimizing productivity. Empty tubes are fed from above along the sidewall, with the system automatically conducting the tube loading process. Tubes filled with products then drop into a collection box below.

Technical Specifications

Item	Description
Feeding mechanism	Stainless steel carrier strip
Discharge method	Tube
Punching Pressure	≥4 tons
Punching Speed	45 times per minute
Dimensions	1450mm (Length) x2140mm (Width) x 1880mm (Height)
Weight	1200KG
Power Supply	Three-phase five-wire system, 380V 50Hz, total power 6KW
Compressed Air	0.4Mpa to 0.6Mpa
Control Method	PLC

AUTO UNLOADER TO TUBE SYSTEM FOR IDF FRAME DESIGN OF SOP SERIES PRODUCT

SOP/TSSOP/MSOP AUTO TRIM/FORM SYSTEM

online message

Dear customers, if you have any comments and suggestions on our products or services, please let us know in time, we will satisfy you as soon as possible